Add the area, person, set you are going to light.
|
|
| Draw an arrow for each direction you would like a light to shine from. |
 |
| Create a drawing for each
different set. Sometimes this can create a very crowded drawing. In
that case, you can separate the lights and drawings into areas and
sources. |
 |
| You can create a drawing for each "system." Here is the front light via the stage left side. |
 |
| All the back light. Notice that some are two-fered. |
 |
| Figure out where you can hang
lights. Note: if you want a light to be someplace that is missing a
pipe, you have two choices. 1) hang a pipe, or some other device to
hang a unit from, or 2) move the light. |
 |
| Take each small drawing of arrows and add the arrows to one big drawing. |
 |
| Now we change the arrows to
symbols. For this prep plot, I've used a "V" and a 3 sided box. The V
is for lekos and the box for fresnels. The lekos have an "x" followed
by a number, 9, 12, 16, etc... To represent 6x9, 6x12, 6x16, etc...
You then need to number all the units, from stage left to stage right.
Now, to tell you the truth, this is enough to get a show hung. That is, if you're going to be there to answer lots of questions.
|
 |
| The next step is to create the final plot in scale.
This plot is being created by one of my students during out lighting
classes. You'll notice that the theater doesn't look like the one I've
used above. This one is a small black box theater with a grid. If you
take a close look, you'll see drafted symbols representing lighting
units. |
 |
| This is a close up of a lighting
template. They are available from most lighting supply houses and from
some web sites. You can check our pro-corner to find a vendor. These templates are made in several different scales and for different types of lights. |
 |