Light Plots

This set in introductory instructions in creating a light plot is the result of a request for help from one of our mailing list members. 
Start with a small ground plan of the theater space you are working in.ltplota.jpg (12880 bytes)
Add the area, person, set you are going to light.ltplotb.jpg (15542 bytes)
Draw an arrow for each direction you would like a light to shine from.ltplotc.jpg (21261 bytes)
Create a drawing for each different set. Sometimes this can create a very crowded drawing. In that case, you can separate the lights and drawings into areas and sources.ltplotd.jpg (21745 bytes)
You can create a drawing for each "system." Here is the front light via the stage left side.ltplote.jpg (17118 bytes)
All the back light. Notice that some are two-fered.ltplotf.jpg (24517 bytes)
Figure out where you can hang lights. Note: if you want a light to be someplace that is missing a pipe, you have two choices. 1) hang a pipe, or some other device to hang a unit from, or 2) move the light.ltplotg.jpg (22588 bytes)
Take each small drawing of arrows and add the arrows to one big drawing.ltploth.jpg (25188 bytes)
Now we change the arrows to symbols. For this prep plot, I've used a "V" and a 3 sided box. The V is for lekos and the box for fresnels. The lekos have an "x" followed by a number, 9, 12, 16, etc... To represent 6x9, 6x12, 6x16, etc...

You then need to number all the units, from stage left to stage right.

Now, to tell you the truth, this is enough to get a show hung. That is, if you're going to be there to answer lots of questions.

ltploti.jpg (18804 bytes)
The next step is to create the final plot in scale. This plot is being created by one of my students during out lighting classes. You'll notice that the theater doesn't look like the one I've used above. This one is a small black box theater with a grid. If you take a close look, you'll see drafted symbols representing lighting units.ltplotj.jpg (27081 bytes)
This is a close up of a lighting template. They are available from most lighting supply houses and from some web sites. You can check our pro-corner to find a vendor. These templates are made in several different scales and for different types of lights.ltgtmplt2.JPG (19590 bytes)
Another page to take a look has the board notes from our lighting class 
  
 


Site Home Page Back ] Up ] Next ]

Google
WWW hstech.org

This site is owned & operated by HSTech.org & Scott C. Parker
For information &/or comments, please drop us a line.  Webmaster
© 1998-2004. Refer to the Credit Page for additional contributors.